Terminal block to feed bus and power supply of door installation modules.
- Spring-clamp terminal block, pluggable, 4-pole
- Grid dimension 5.0 mm, connection direction 90°
- Sequencing possible without pole loss
- Gray
| Rated voltage UL/CSA | 300 V |
| Rated current UL/CSA | 8 A |
| Conductor connection UL/CSA | AWG 28 to AWG 16 |
| Rated voltage SEV | 250 V |
| Rated current SEV | 10 A |
| Wire diameter SEV | 0.32 mm to 1.38 mm |
| Cross-section (solid wire) | 1.5 mm² |
| Cross-section (finely stranded wire) | 0.75 mm² |
| Insulation coordination to | EN 60664-1 |
| Minimum air gap and creepage | min. 3.7 mm |
| Overvoltage category | III / III / II |
| Degree of pollution | 3 / 2 / 2 |
| Rated voltage V | 250 / 500 / 500 |
| Rated surge voltage | 2.5 / 4 / 2.5 |
| Ingress protection to IEC 60529 | IP20 |
| Stripping length | min. 4 mm |
LA1 LON
LM1 LON
LM2 LON
LS1 LON
LT1 LON
LT2 LON
LT3 LON
MR-DIO4/2-IP65 Modbus RTU
EW-DIO4/2-IP65
LF-DI10-IP65 LON
LF-DO4-IP65 LON
LF-AO4-IP65 LON
LF-DIO4/2-IP65 LON
LF-TI-IP65 LON
BMT-DIO4/2-IP65 BACnet MS/TP
BMT-DI4-IP65 BACnet MS/TP
MR-DI4-IP65 Modbus RTU, with external display
MR-AIO4/2-IP65 Modbus RTU
