Terminal block to feed bus and power supply of I/O components.
- Screw-type terminal block, solderable, 4-pole
- Grid dimension 3.5 mm, connection direction 90°
- Wire protection
- Black
| Rated voltage UL/CSA | 300 V |
| Rated current UL/CSA | 10 A |
| Conductor connection UL/CSA | AWG 28 to AWG 16 |
| Wire diameter SEV | 0.2 mm to 1.38 mm |
| Cross-section (solid wire) | 1.5 mm² |
| Cross-section (finely stranded wire) | 0.75 mm² |
| Insulation coordination to | EN 60664-1 |
| Minimum air gap and creepage | min. 2.1 mm |
| Overvoltage category | III / III / II |
| Degree of pollution | 3 / 2 / 2 |
| Rated voltage V | 160 / 400 / 130 |
| Rated surge voltage | 2.5 / 4 / 2.5 |
| Ingress protection to IEC 60529 | IP00 |
| Tightening torque SEV | max. 0.15 Nm |
| Stripping length | min. 5 mm |
FRAS 4/21 CAN
FDE 4 CAN
FAE 4 CAN
FAA 4 CAN
MR-TO4 Modbus RTU
MR-DI10 Modbus RTU
MR-AI8 Modbus RTU
MR-DIO4/2 Modbus RTU
MR-DI4 Modbus RTU
MR-AO4 Modbus RTU
MR-DO4 Modbus RTU
EWIO-9180
EW-TO4
EW-DI10
EW-AI8
EW-DIO4/2
EW-DI4
EW-AO4
EW-DO4
LF-DI4 LON
LF-DI10 LON
LF-DO4 LON
LF-AI8 LON
LF-AOP4 LON
LF-DIO4/2 LON
LF-DM4/4 LON
LF-AM2/4 LON
LF-SI4 LON
LF-TP LON
LF-CI4 LON
LF-TO4 LON
LF-DI230 LON
BMT-TO4 BACnet MS/TP
BMT-DI10 BACnet MS/TP
BMT-AI8 BACnet MS/TP
BMT-DIO4/2 BACnet MS/TP
BMT-DI4 BACnet MS/TP
BMT-AO4 BACnet MS/TP
BMT-DO4 BACnet MS/TP
EWIO-9180-FB
MR-AOP4 Modbus RTU
BMT-AOP4 BACnet MS/TP
MR-DOA4 Modbus RTU
MR-CI4 Modbus RTU
BMT-TP BACnet MS/TP
BMT-SI4 BACnet MS/TP
MR-SI4 Modbus RTU
EWIO-9180-M
MR-TP Modbus RTU
MR-DIO4/2S Modbus RTU