Switch-on module for bus connection, supply voltage and adjustable bus termination. The switch-on module was developed as wiring help for supplying the supply voltage and a two-wire bus to the LON bus modules. The supply voltage and the two-wire bus are led to the upper part of the housing over a sturdy terminal block with a cross section of max. 2.5 mm² and connected to the modules by means of the jumper. Using a suitable interface cable, the two-wire bus can be connected to a PC over the two RJ45 jacks. A bus terminating resistor of 52.3 Ohm (R/2) for free network topology and 105 Ohm (R) for line topology can be set by means of the jumper under the removable cover.Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.
|Operating voltage||24 V AC/DC ± 10% (SELV)|
|Current consumption||less than 5 mA|
|Switch-on duration||relative 100 %|
|Dimensions (W x H x D)||35 x 70 x 78 mm|
|Operating temperature range||-5 °C to +55 °C|
|Storage temperature range||-20 °C to +70 °C|
|Ingress protection for housing / terminal block||IP40 / IP20|