
MR-DIO4/2 Modbus RTU
- Color: gray
- Feature 1: 4x IN (U or contact)
- Feature 2: 2x OUT (relay CO)
- EAN-No: 4250184135623
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. With strong inductive loads, we recommend protecting the relay contacts with an RC element. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard registers via a Modbus master. Module address, bit rate and parity are set with two rotary switches on the front or by software.Suitable for decentralized mounting on DIN TH35 rail according to IEC 60715 in electrical distribution cabinets.
Protocol | Modbus RTU |
Address range | 00 to 99 |
Bus interface | RS485 (two-wire bus) |
Transmission rate | 1200 to 115200 bit/s |
Operating voltage | 24 V AC/DC ± 10% (SELV) |
Current consumption | 200 mA (AC) / 75 mA (DC) |
Relative duty cycle | 100 % |
Inputs | 4 x digital |
Input / voltage | 30 V DC |
Input / high signal | more than 8 V AC/DC |
Output / contacts | 2 changeover contacts (DPDT) |
Output / switching voltage | 250 V AC |
Output / continuous current | 16 A / output |
Output / switch-on current | 80 A (less than 20 ms) |
Display | Green, red and yellow LED |
Dimensions (W x H x D) | 50 x 70 x 75 mm |
Weight | 126 g |
Operating temperature range | -5 °C to +55 °C |
Storage temperature range | -20 °C to +70 °C |
Ingress protection for housing / terminal block | IP40 / IP20 |